Featured:1000Mbps DIN Rail Powerline Ethernet Bridge
DIN rail industrial powerline Ethernet bridge 1Gbps G.hn WD-1000M-GT/GS/GD 1.2 Features Packet loss ： ≤0.1% （ 100M,load 70% ） Support 7*24 hours all weather operation H ardware watch dog function PING≤2MS The quantity of the group ≤16pcs 1.3 Immunity of ESD The testing voltage which the device...
DIN rail industrial powerline Ethernet bridge
1Gbps G.hn WD-1000M-GT/GS/GD
DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..
1.1.1 Technical parameters
l Support G.hn.
l Industrial DIN rail style installation
l Actual bandwidth up to 400Mbps
l The maximum transfer distance up to 1000 meters
l Self-adapt the rate
l Compatible with all G.hn devices
l One Domain Master can manage 15pcs End Point。
l There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit
l Support Remote Firmware update(TR069)
l 802.3D Ethernet Bridge。
l 802.1Q VLAN。
l Quality of Service(QoS) 。
l Support local web management
l Working temperature: -40℃-80℃。
l Operating humidity: 10%-85% no condense
l Storage humidity:5%-90% no condense
1.1.4 Design standards
l ITU-T G.9960
l IEC 60529
l IEC 50022
l IEC 60068-2-6
1*LAN 10/100/1000Base-TX self adaption RJ45，1*AC power interface MDI/MDX support
1*LAN 10/100/1000Base-TX self adaption RJ45，1*DC power interface MDI/MDX support
LED display light
Ethernet, PLC link ,power
25,50 and 100MHz and MIMO (based on G.9963)
IEEE802.3，IEEE802.3x, IEEE802.3u G.Hn
Effective transfer rate
Remote Firmware update，support TR-069（optional）
802.1D Ethernet Bridge
Quality of Service(QoS)
Operating humidity:10%-85% (no condense)
Storage humidity: 5%-90%(no condense)
FCC、CE class B,WEEE,RoHS
Packet loss：≤0.1%（100M,load 70%）
Support 7*24 hours all weather operation
Hardware watch dog function
The quantity of the group ≤16pcs
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.7 System topology
KUNSHAN WONDERTEK TECHNOLOGY CO.,LTD.
If you are interested in our Featured:1000Mbps DIN Rail Powerline Ethernet Bridge, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also offer the OEM and ODM service based on customized orders.