Home > Product > Powerline Ethernet Adapter > Indutrial Powerline Ethernet Adapter
Product Categories
DIN Rail Industrial Powerline Ethernet Bridge 1.2Gps

DIN Rail Industrial Powerline Ethernet Bridge 1.2Gps

WD-1201M-DIN(A) DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which supports the HomePlug protocol and the actual bandwidth up to 500Mbps. The product has been widely used in many aspect just as factory automation,smart parking garage.

Send Inquiry

Product Details

Brief introduction

DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product
which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports
the HomePlug protocol and the actual bandwidth up to 500Mbps. The product has
been widely used in many aspect just as railway, mines, industrial
telecommunication and metro etc.


1.1 Highlight
   1.1.1 Technical parameters
        -Support HomePlug.
        -Industrial DIN rail style installation
        -Actual bandwidth up to 500Mbps
        -The maximum transfer distance up to 1000 meters
        -Self-adapt the rate
        -Compatible with all HomePlug devices
        -One Domain Master can manage 128pcs End Point。
        -There can be 4 groups(4different Domain Master) of PLC  telecom munication devices in the same       

             power  line circuit                                                                    


   1.1.2   Manageability
         -Support Remote Firmware update(TR069)
         -802.3D Ethernet Bridge。
         -802.1Q VLAN。
         -Quality of Service(QoS) 。
         -IGMO(IPv4)Snooping&MLD(IPv6)Snooping
         -Support local web management
   1.1.3  Operating environment
         -Working temperature: -40℃-80℃。
         -Operating humidity: 10%-85% no condense
         -Storage humidity:5%-90% no condense
   1.1.4  Design standards
         -HomePlug
         -IEC 60529
         -IEC 50022
         -IEC 60068-2-6
         -MIL-STD-810G


  specs.png



1.2  Features
       Packet loss:≤0.1%(100M,load 70%)
       Support 7*24 hours all weather operation
       Hardware watch dog function
       PING≤2MS
       The quantity of the group ≤16pcs


1.3  Immunity of ESD
       The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV
       air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10
       times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.


1.4  Immunity of electrical fast transient impulse group(Common mode)
       The testing voltage which the device should be beared: between the power supply
       voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV,
       repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5
       times each. According to GB/T 17626.4-2008.


1.5   Anti interference of surge impact
        The testing voltage which the device should be beared: ±2kV, the interval of
        continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According
        to GB/T 17626.5-2008.(protection: all models protection and varistor series of
        discharge tube type)


1.6  Anti- vibration
       Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude
       7mm), interface with no loose, device with no Sealing off and drop in the test.


1.7  System Topology

Topology.png



If you are interested in our din rail industrial powerline ethernet bridge 1.2gps, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also offer the OEM and ODM service based on customized orders.
Related Products

Send your message to us

Services & Products
Powerline Ethernet Adapter
Coaxial Ethernet Adapter
PLC IP Camera
Contact Us
Tel: +86-512-83670078
Fax: +86-512-55001422
Add: No.369,Kangzhuang Road,Zhoushi Town,
Kunshan,Jiangsu province,China
Email:lechensales@vip.163.com
Feedback